Concrete Steps & Stairs
Safe, durable concrete steps built to code with proper rise, run, and handrail support in North Augusta, SC.
Steps That Look Great and Keep People Safe
Concrete steps are one of the most important safety features on any property. A front porch with crumbling steps or uneven risers creates a real liability. Steps that are too steep, too shallow, or lack proper handrail support are accidents waiting to happen. When you need new steps or a replacement for worn-out ones, it pays to have them built right the first time.
At Advanced North Augusta Concrete, we build concrete steps and stairs that meet building code requirements for rise, run, and landing dimensions. Every set of steps we pour is designed with safety in mind. We make sure the tread depth is consistent, the risers are uniform in height, and the surface has enough texture to provide traction even when wet. These details matter because they prevent trips and falls.
We install steps for front and back porches, deck access, basement entrances, garage entry, and outdoor grade changes. Whether you need a simple two-step stoop or a full staircase with multiple landings, our crew has the experience and tools to handle it. We work with homeowners and contractors across North Augusta, Augusta, Aiken, and the surrounding CSRA area.
Call us at (803) 991-5033 for a free estimate on your step project. We will measure the rise, design a code-compliant layout, and give you a clear price before we start.
Types of Concrete Steps We Build
Not all steps are the same. The design and construction method depend on the height, location, and how the steps tie into the existing structure. Here are the most common types we install:
- Porch and entryway steps that connect your front or back door to ground level with proper landings and room for handrails.
- Basement and cellar stairs that provide safe access to lower levels with non-slip treads and code-compliant dimensions.
- Deck and patio steps that transition smoothly from raised outdoor living spaces down to yard level.
- Outdoor grade change stairs for hillside access, terraced landscaping, and sloped yards.
- Precast step replacement where we remove old failing precast units and pour custom steps that fit your exact opening.
- Commercial and ADA-compliant stairs for businesses, churches, and public buildings that meet accessibility standards.
If your project also involves building or replacing a patio or walkway that connects to the steps, check out our concrete patio and sidewalk and walkway services to coordinate the work.
Built to Code with Consistent Dimensions
Building codes exist for a reason, especially when it comes to stairs. The most important measurements are riser height and tread depth. Risers should be between 4 and 7.75 inches tall, and every riser in the staircase needs to be within a quarter inch of the others. Treads should be at least 10 inches deep so there is enough room to plant your foot securely.
We measure the total rise from the bottom to the top landing and calculate the number of steps needed to keep each riser within code. We then build forms that hold the concrete in place and ensure every dimension is exact. The steps are poured as a single monolithic unit when possible, or tied into the foundation with rebar when they connect to an existing structure.
For outdoor steps, we add a slight slope on each tread so water drains off instead of pooling. We also apply a broom finish for slip resistance or a light sandblast texture that provides grip without being rough on bare feet. Handrails are installed if required by code, and we can embed anchor bolts or sleeves during the pour to make rail installation easier.
If your existing steps are damaged or unsafe, we can handle a complete concrete repair or replacement. Visit our home page to see all the concrete services we offer in North Augusta, SC.
Common Questions About Concrete Steps
How long does it take to build concrete steps?
Most residential step projects take one to two days from start to finish. We build the forms, pour the concrete, and finish the surface all in one day. The concrete then needs to cure for at least 24 hours before you can walk on it lightly, and about seven days before it can handle full use. If we need to remove old steps first or if the project requires permits and inspections, the timeline extends by a day or two. We coordinate with you to minimize disruption and keep you updated on progress.
Do I need a handrail on my concrete steps?
Building codes typically require a handrail if you have more than three risers (four steps total). The handrail must be between 34 and 38 inches above the nose of the treads and needs to be securely anchored. We can embed anchor bolts or sleeves during the concrete pour to make handrail installation straightforward. Even if your steps do not legally require a handrail, adding one is always a good idea for safety, especially for older adults or anyone with mobility challenges.
Can you match the finish of my existing patio or walkway?
Yes, in most cases. If you have a broom-finished patio, we use the same broom finish on the steps. If your existing concrete is stamped or colored, we can apply the same pattern and color to the new steps so everything coordinates. Keep in mind that new concrete always looks slightly different from aged concrete at first, but the color evens out over time. We can also apply a stain or sealer to both the steps and the surrounding concrete to create a uniform appearance.
Need Safe, Code-Compliant Steps?
Call today for a free estimate. We will measure your site and design steps that work perfectly for your property.
(803) 991-5033